• Đầu đo độ cứng cho tất cả các loại máy đo

  • Mã sản phẩm: Indenters
  • Nhà sản xuất: Bowers
  • Xuất xứ: UK
  • Bảo hành: 12 months
  • Giá sản phẩm: 00 vnđ


    With official calibration certificates UKAS, DKD or ASTM
 
   CV Instruments offers a wide range of indenters. All certified indenters
   will be issued with a certificate traceable to internationally recognised
   standards such as UKAS, DKD or ASTM. We also offer low cost factory
   certified indenters and specials (see below).
 
   Specials
   CV Instruments also offer special adapters for indenters to enlarge the
   field of application. Small gooseneck adapters are available in three sizes
   to permit regular or superficial Rockwell hardness testers to perform
   internal tests on rings, tubes and annular parts where the inside
   diameter, plus the wall thickness, is less than 50.8mm or 2 inches.
 
   These adapters will fit any of the standard Rockwell hardness testers.
   The gooseneck adapter can be clamped into the bottom of the plunger
   rod (in the same manner as an indenter) and is not heavy enough to
   affect a reading due to increasing the applied load. The minimum
   internal diameter which can be tested is 11.5mm or 7/16 inch.
 
   Ask for our separate product list of indenters.


      Chi-tiet-Indenters.png

Máy đo độ cứng CV-600A

Mã SP: CV-600A
Giá: 00 vnđ

Máy đo độ cứng EW-655

Mã SP: EW-655
Giá: 00 vnđ

Máy đo độ cứng EW-650

Mã SP: EW-655
Giá: 00 vnđ

Máy đo độ cứng Rockwell cao cấp

Mã SP: EW-655
Giá: 00 vnđ

Mũi đo độ cứng

Mã SP:
Giá: 00 vnđ

Máy đo độ cứng Vickers EW-412AAT

Mã SP: W-412AAT
Giá: 00 vnđ

Máy đo độ cứng EW-6000

Mã SP: EW-6000
Giá: 00 vnđ

Máy đo độ cứng Vickers EW-410

Mã SP: EW-410AAT
Giá: 00 vnđ

Máy đo độ cứng Rockwell

Mã SP: CV-600A
Giá: 00 vnđ

Máy đo độ cứng Vickers EW-4000

Mã SP: EW-4000
Giá: 00 vnđ

Máy đo độ cứng Rockwell

Mã SP: CV-600A
Giá: 00 vnđ